Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly.
(Refer to the BD group - "Roof trim") |
3. |
Check for continuity between the terminals. If the continuity is not as specified, replace the sunroof switch. |
Input Speed Sensor: Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the valve body assembly.
(R ...
Side Airbag (SAB) Module: Components and Components Location
Components
...