Kia Sportage: Oil Pump: Description and Operation - Hydraulic System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Oil Pump: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Hydraulic System / Oil Pump: Description and Operation

Description
The oil pump is built-in as a single unit with the 26 Brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Components and Components Location
Components Location 1. Automatic transaxle2. Valve body assembly3. Oil pump assembly ...

Oil Pump: Components and Components Location
Component Location 1. Automatic transaxle2. Oil pump assembly Component 1. Reaction shaft support assembly2. Oil pump housing3. Driven gear4. Drive gear5. Oil seal6. Bush-Housing7. Reactio ...

Other Information:

Power Seat Control Switch: Repair procedures
Inspection 1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. Remo ...

Main fuse and multi fuse
If the main fuse and multi fuse is blown, it must be removed as follows: 1.Disconnect the negative battery cable. 2.Remove the nuts shown in the picture above. 3.Replace the fuse with a new one o ...

Categories

Copyright www.kispmanual.com 2014-2026