• With automatic transaxle
To turn off the engine (START/RUN position) or vehicle power (ON position), press the ENGINE START/STOP button with the shift lever in the P (Park) position. When you press the ENGINE START/STOP button without the shift lever in the P (Park) position, the ENGINE START/STOP button will not change to the OFF position but to the ACC position.
In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times successively within 3 seconds. If the vehicle is still moving, you can restart the engine without depressing the brake pedal by pressing the ENGINE START/STOP button with the shift lever in the N (Neutral) position.
Brake Pedal: Repair procedures
Removal
1.
Remove the crash pad lower panel and reinforcement panel. (Refer to the Body group- crash pad).
2.
Pull down steering column shaft after removing bolts and nuts.
3.
Disconnect t ...
Limp home (override) procedure
When you turn the ignition switch to the ON position, if the immobilizer indicator
() goes off after blinking 5 times,
your transponder equipped in the ignition key is out of order. You cannot sta ...