Fail-Safe Mode |
Item | Fail-Safe | |
ETC Motor | Throttle valve stuck at 5° | |
TPS | TPS 1 fault | ECM looks at TPS2 |
TPS 2 fault | ECM looks at TPS1 | |
TPS 1,2 fault | Throttle valve stuck at 5° | |
APS | APS 1 fault | ECM looks at APS 2 |
APS 2 fault | ECM looks at APS 1 | |
APS 1,2 fault | Throttle valve stuck at 5° |
When throttle value is stuck at 5°, engine speed is limited
at below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~ 31
mph) |
Inhibitor Switch: Description and Operation
Description
Inhibitor Switch monitors the lever''s position(P, R, N, D) and is used to control gear setting signals. ...
Description and Operation
Description
TREAD Lamp
–
Tire Under Inflation / Leak Warning.
1.
Turn on condition
•
When tire pressure is below allowed threshold
•
When rapid leak is detected by the ...