Kia Sportage: Description and Operation

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Windshield Deicer / Description and Operation

Description

Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay.

Body control module receives an input signal from the deicer switch, then controls relay.

Since the generator "L" is switched ON, if the deicer switch is ON, then deicer output is ON for 20 minutes.

Components and Components Location

Component Location 1. Windshield deicer relay2. Windshield deicer switch3. Windshield deicer4. Deicer connector ...

Windshield Deicer: Repair procedures

Inspection 1. Remove the cowl top cover. (Refer to the wiper) 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. Check for continuity between the terminals ...

Other Information:

Front Impact Sensor (FIS): Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

A/C Pressure Transducer: Description and Operation
Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after it is measured. By voltage value, the engine ECU controls cooling fan by operating ...

Kia Sportage: Description and Operation

Components and Components Location

Windshield Deicer: Repair procedures

Other Information:

Categories