Kia Sportage: DBC Switch: Description and Operation
The DBC function is the acronym word of Downhill Brake
Control function. When a vehicle goes down the hill, just pushing the
DBC switch enables the car to keep its vehicle''s speed at a constant
value without operating the brake pedal. The DBC function is operated
when the vehicle is on the decline and its velocity is under the
predetermined speed.
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad side switch assembly.
3.
Check the continuity between the switch terminals as ...
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad side switch assembly.
3.
Check the continuity between the switch terminals as ...
Other Information:
Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly
inflated or on slippery road surfaces. Tires should be replaced when tread wear
indicators appear. Slow down when ...
Front Driveshaft: Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.3 ~ ...