Kia Sportage: Curtain Airbag (CAB) Module: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module: Description and Operation
| Description |
Curtain airbags are installed inside the headliner (LH and
RH) and protect the driver and passenger from danger when side crash
occurs. The SRSCM determines deployment of curtain airbag by using side
impact sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag
module even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury. |
Side Airbag (SAB) Module: Repair procedures
Removal
The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag.
1.
Disconnect the battery negative ...
Other Information:
Engine compartment fuse panel
✽ NOTICE
The actual fuse/relay panel label may differ depending on equipment/ options.
...
Evaporator Temperature Sensor: Repair procedures
Inspection
1.
Ignition "OFF".
2.
Disconnect evaporator temperature sensor.
3.
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Spe ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2025