Kia Sportage: Condenser: Components and Components Location - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Sportage SL Service & Repair ManualKia Sportage: Condenser: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Condenser: Components and Components Location

Component Location

Compressor: Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negativ ...

Condenser: Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. ...

Other Information:

Turn Signal Lamp: Repair procedures
Removal Rear Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to BD group - "Rear Bumper") 3. Disconnect the connector. Remove the rear ...

Pressure Sensor: Description and Operation
Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. I ...

Categories


Copyright © www.kispmanual.com 2014-2024