Kia Sportage: Climate Seat: Repair procedures - Seat Electrical - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Climate Seat: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Seat Electrical / Climate Seat: Repair procedures

Removal
1.
Remove the front seat assembly.
(Refer to BD group - "Front Seat")
2.
Remove the seat back cover and cushion cover.
(Refer to BD group - "Front Seat")
3.
Remove the ventilation duct (A) from the seat back after loosening the screw and rivet.

4.
Remove the ventilation duct and blower (A) in the cushion and back after loosening the screw.

5.
Remove the bracket and ventilation seat ECU (B) after loosening screws (A, 3EA).

Installation
1.
Install the connectors and air ventilation control unit.
2.
Install the air ventilation duct and blower.
3.
Install the seat back cover.
4.
Install the seat assembly and seat track cover.
Climate Seat: Description and Operation
Description The system uses a FAN under the seat to help remove the moisture and warmth from occupants and surface of the seats. It pulls in cabin air through the blower installed under the seat ...

Fuses And Relays
...

Other Information:

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. Slow down when ...

Rear Hub - Carrier: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.3 ~ 1 ...

Categories


Copyright © www.kispmanual.com 2014-2025