Kia Sportage: Canister: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Emission Control System / Evaporative Emission Control System / Canister: Repair procedures

Removal

1.	Remove the fuel tank. (Refer to "Fuel tank" in FL group.)

2.	Disconnect the vapor tube quick-connector (B) and the ventilation hose (A).

3.	Remove the canister in the direction of an arrow after removing the installation screws (C).

Inspection

1.	Check for the following items visually. - Cracks or leakage of the canister - Loose connection, distortion, or damage of the vapor hose/tube A: Canister - Atmosphere B: Canister - Intake Manifold C: Canister - Fuel Tank

Installation

Installation is the reverse of removal.

Canister installation screw:

1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)

Repair procedures

Inspection [System Inspection] 1. Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold. · At Cold Engine [Engine Coolant Temperatur ...

Fuel Filler Cap: Description and Operation

Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and t ...

Other Information:

Manifold Absolute Pressure Sensor (MAPS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Tur ...

Relay Box (Passenger Compartment): Repair procedures
Inspection Fuse 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are there any blown fuses? ...

Kia Sportage: Canister: Repair procedures

Repair procedures

Fuel Filler Cap: Description and Operation

Other Information:

Categories