Kia Sportage: A/C Pressure Transducer: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / A/C Pressure Transducer: Description and Operation
| Description |
A/C pressure transducer convert the pressure value of high
pressure line into voltage value after it is measured. By voltage value,
the engine ECU controls cooling fan by operating it high speed or low
speed. Engine ECU stops the operation of compressor when the temperature
of refrigerant line is too high or too low to optimize air conditioning
system.
A/C Pressure Transducer: Components and Components Location
Component Location
...
A/C Pressure Transducer: Repair procedures
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals.
2.
Inspect the voltage value whether it is sufficient to be regular value ...
Other Information:
ESC OFF indicator
The ESC OFF indicator will illuminate when the ignition switch is turned ON,
but should go off after approximately 3 seconds. To switch to ESC OFF mode, press
the ESC OFF button. The ESC OFF ind ...
Rear Wiper Motor: Repair procedures
Inspection
Rear Wiper Motor
1.
Remove the 4P connector from the rear wiper motor.
2.
Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively.
3.
Check that ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2025