Kia Sportage: Transaxle Control Module (TCM): Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Transaxle Control Module (TCM): Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Control Module (TCM): Description and Operation

Description
Transaxle Control Module (TCM) is the automatic transmission''s brain. The module receives and processes signals from various sensors and implements a wide range of transmission controls to ensure optimal driving conditions for the driver.
TCM is programmed for optimal response to any on-road situation. In the event of a transmission failure or malfunction, TCM stores the fault information in memory so that the technician may reference the code and quickly repair the transmission.
Functions
Monitors the vehicle''s operating conditions to determine the optimal gear setting.
Performs a gear change if the current gear setting differs from the identified optimal gear setting.
Determines the need for damper clutch (D/C) activation and engages the clutch accordingly.
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly.
Diagnoses the automatic transaxle for faults and failures.
Components and Components Location
Components Location [Vehicle Components] 1. Automatic transaxle2. Transaxle control module (TCM)3. Shift lever4. DLC [Transaxle Components] 1. Input speed sensor2. Output speed sensor3. So ...

Transaxle Control Module (TCM): Schematic Diagrams
1. TCM connector and terminal function 2. TCM Terminal Function Connector [A] PinDescriptionPinDescription1?54?2Line pressure control solenoid valve (LINE_VFS)55?3Torque converter control solen ...

Other Information:

Compression Test
Compression Pressure Inspection     If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up and stop ...

Repair procedures
On-vehicle Inspection Spark Test 1. Disconnect the ignition coil connectors (A). 2. Remove the ignition coils (A). 3. Using a spark plug socket, remove the spark plug. 4. Install th ...

Categories


Copyright © www.kispmanual.com 2014-2024