Kia Sportage: Heated Oxygen Sensor (HO2S): Schematic Diagrams

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S): Schematic Diagrams

Heated Oxygen Sensor (HO2S): Specifications

Specification HO2S [Bank 1/Sensor 1] ItemSpecificationHeater Resistance (?)2.5 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (?)Output Voltage(V)RICHApprox. 0.9LEANApprox. 0.04 ...

Heated Oxygen Sensor (HO2S): Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. 4. Measure resistance between the HO2S t ...

Other Information:

Electric power steering (EPS) system warning light
This indicator light comes on after the ignition key is turned to the ON position and then it will go out after the engine is started. This light also comes on when the EPS has some troubles. If ...

Rear Assist Arm: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bo ...