Removal |
1. |
Disconnect the vapor hose (A). |
2. |
Remove the PCV valve (B). |
Inspection |
1. |
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.
|
Installation |
1. |
Installation is reverse of removal.
|
Rain Sensor: Repair procedures
Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch input (LIN communication) is
ON then both wiper low relay and wiper high relay outputs are
controlled by the rain sensor inpu ...
Parking brake & brake fluid warning light
Parking brake warning
This light is illuminated when the parking brake is applied with the ignition
switch in the START or ON position. The warning light should go off after a few
seconds when ...