Inspection |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the roof trim.
(Refer to the BD group - "Roof trim") |
3. |
Remove the handsfree mic (A) after loosening the connector and screws (3EA) from roof top. |
4. |
Check the continuity of Mic between terminals. |
Accelerator Position Sensor (APS): Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors ...
Front Impact Sensor (FIS): Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impac ...